victronups − Driver for IMV/Victron UPS unit Match, Match Lite, NetUps
This man page only documents the hardware−specific features of the the victronups driver. For information about the core driver, see nutupsdrv(8).
The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the NetUps line.
The Match Lite line may only report a handful of variables. This is usually not a bug − they just don’t support anything else.
If your Victron cable is broken or missing, use this diagram to build a clone:
• https://github.com/networkupstools/nut/blob/master/docs/cables/ge−imv−victron.txt
• docs/cables/ge−imv−victron.txt
This driver supports the following optional setting in the ups.conf(5):
modelname=name
Set model name
usd=delay
Set delay before shutdown on UPS
The protocol for this UPS is not officially documented.
• Radek Benedikt <[email protected]>
• Daniel Prynych <[email protected]>
nutupsdrv(8)
The NUT (Network UPS Tools) home page: https://www.networkupstools.org/