uhd_rx_nogui - GNU Radio receiver

NAME

uhd_rx_nogui − GNU Radio receiver

uhd_rx_nogui.py [options]

Command line GNU Radio receiver that takes signal from a UHD peripheral receiver and sends demodulated audio to the sound device.

−h, −−help

show this help message and exit

−a ARGS, −−args=ARGS

UHD device address args , [default=]

−−spec=SPEC

Subdevice of UHD device where appropriate

−A ANTENNA, −−antenna=ANTENNA

select Rx Antenna where appropriate [default=none]

−f Hz, −−frequency=Hz

set receive frequency to Hz [default=none]

−c Hz, −−calibration=Hz

set frequency offset to Hz [default=0.0]

−g dB, −−gain=dB

set RF gain [default is midpoint]

−m TYPE, −−modulation=TYPE

set modulation type (AM,FM) [default=none]

−o RATE, −−output−rate=RATE

set audio output rate to RATE [default=32000]

−r dB, −−rf−squelch=dB

set RF squelch to dB [default=−50.0]

−p FREQ, −−ctcss=FREQ

set CTCSS squelch to FREQ [default=none]

−O AUDIO_OUTPUT, −−audio−output=AUDIO_OUTPUT

pcm device name. E.g., hw:0,0 or surround51 or /dev/dsp