myisamchk - MyISAM table-maintenance utility



myisamchk − MyISAM table−maintenance utility


myisamchk [options] tbl_name ...


The myisamchk utility gets information about your database tables or checks, repairs, or optimizes them. myisamchk works with MyISAM tables (tables that have .MYD and .MYI files for storing data and indexes).

The use of myisamchk with partitioned tables is not supported.


It is best to make a backup of a table before performing a table repair operation; under some circumstances the operation might cause data loss. Possible causes include but are not limited to file system errors.

Invoke myisamchk like this:

shell> myisamchk [options] tbl_name ...

The options specify what you want myisamchk to do. They are described in the following sections. You can also get a list of options by invoking myisamchk −−help.

With no options, myisamchk simply checks your table as the default operation. To get more information or to tell myisamchk to take corrective action, specify options as described in the following discussion.

tbl_name is the database table you want to check or repair. If you run myisamchk somewhere other than in the database directory, you must specify the path to the database directory, because myisamchk has no idea where the database is located. In fact, myisamchk does not actually care whether the files you are working on are located in a database directory. You can copy the files that correspond to a database table into some other location and perform recovery operations on them there.

You can name several tables on the myisamchk command line if you wish. You can also specify a table by naming its index file (the file with the .MYI suffix). This allows you to specify all tables in a directory by using the pattern *.MYI. For example, if you are in a database directory, you can check all the MyISAM tables in that directory like this:

shell> myisamchk *.MYI

If you are not in the database directory, you can check all the tables there by specifying the path to the directory:

shell> myisamchk /path/to/database_dir/*.MYI

You can even check all tables in all databases by specifying a wildcard with the path to the MariaDB data directory:

shell> myisamchk /path/to/datadir/*/*.MYI

The recommended way to quickly check all MyISAM tables is:

shell> myisamchk −−silent −−fast /path/to/datadir/*/*.MYI

If you want to check all MyISAM tables and repair any that are corrupted, you can use the following command:

shell> myisamchk −−silent −−force −−fast −−update−state \
−−key_buffer_size=64M −−sort_buffer_size=64M \
−−read_buffer_size=1M −−write_buffer_size=1M \


This command assumes that you have more than 64MB free. For more information about memory allocation with myisamchk, see the section called “MYISAMCHK MEMORY USAGE”.


You must ensure that no other program is using the tables while you are running myisamchk. The most effective means of doing so is to shut down the MariaDB server while running myisamchk, or to lock all tables that myisamchk is being used on.

Otherwise, when you run myisamchk, it may display the following error message:

warning: clients are using or haven’t closed the table properly

This means that you are trying to check a table that has been updated by another program (such as the mysqld server) that hasn’t yet closed the file or that has died without closing the file properly, which can sometimes lead to the corruption of one or more MyISAM tables.

If mysqld is running, you must force it to flush any table modifications that are still buffered in memory by using FLUSH TABLES. You should then ensure that no one is using the tables while you are running myisamchk

However, the easiest way to avoid this problem is to use CHECK TABLE instead of myisamchk to check tables.

myisamchk supports the following options, which can be specified on the command line or in the [myisamchk] option file group.


The options described in this section can be used for any type of table maintenance operation performed by myisamchk. The sections following this one describe options that pertain only to specific operations, such as table checking or repairing.

−−help, −?

Display a help message and exit. Options are grouped by type of operation.

−−HELP, −H

Display a help message and exit. Options are presented in a single list.

−−debug=debug_options, −# debug_options

Write a debugging log. A typical debug_options string is ’d:t:o,file_name’. The default is ’d:t:o,/tmp/myisamchk.trace’.

−−silent, −s

Silent mode. Write output only when errors occur. You can use −s twice (−ss) to make myisamchk very silent.

−−verbose, −v

Verbose mode. Print more information about what the program does. This can be used with −d and −e. Use −v multiple times (−vv, −vvv) for even more output.

−−version, −V

Display version information and exit.

−−wait, −w

Instead of terminating with an error if the table is locked, wait until the table is unlocked before continuing. If you are running mysqld with external locking disabled, the table can be locked only by another myisamchk command.


Print the program argument list and exit.


Don’t read default options from any option file.


Only read default options from the given file.


Read this file after the global files are read.

You can also set the following variables by using −−var_name=value syntax:

The possible myisamchk variables and their default values can be examined with myisamchk −−help:

sort_buffer_size is used when the keys are repaired by sorting keys, which is the normal case when you use −−recover.

key_buffer_size is used when you are checking the table with −−extend−check or when the keys are repaired by inserting keys row by row into the table (like when doing normal inserts). Repairing through the key buffer is used in the following cases:

• You use −−safe−recover.

• The temporary files needed to sort the keys would be more than twice as big as when creating the key file directly. This is often the case when you have large key values for CHAR, VARCHAR, or TEXT columns, because the sort operation needs to store the complete key values as it proceeds. If you have lots of temporary space and you can force myisamchk to repair by sorting, you can use the −−sort−recover option.

Repairing through the key buffer takes much less disk space than using sorting, but is also much slower.

If you want a faster repair, set the key_buffer_size and sort_buffer_size variables to about 25% of your available memory. You can set both variables to large values, because only one of them is used at a time.

myisam_block_size is the size used for index blocks.

stats_method influences how NULL values are treated for index statistics collection when the −−analyze option is given. It acts like the myisam_stats_method system variable. For more information, see the description of myisam_stats_method in Section 5.1.4, “Server System Variables”, and Section 7.4.7, “MyISAM Index Statistics Collection”.

ft_min_word_len and ft_max_word_len indicate the minimum and maximum word length for FULLTEXT indexes. ft_stopword_file names the stopword file. These need to be set under the following circumstances.

If you use myisamchk to perform an operation that modifies table indexes (such as repair or analyze), the FULLTEXT indexes are rebuilt using the default full−text parameter values for minimum and maximum word length and the stopword file unless you specify otherwise. This can result in queries failing.

The problem occurs because these parameters are known only by the server. They are not stored in MyISAM index files. To avoid the problem if you have modified the minimum or maximum word length or the stopword file in the server, specify the same ft_min_word_len, ft_max_word_len, and ft_stopword_file values to myisamchk that you use for mysqld. For example, if you have set the minimum word length to 3, you can repair a table with myisamchk like this:

shell> myisamchk −−recover −−ft_min_word_len=3 tbl_name.MYI

To ensure that myisamchk and the server use the same values for full−text parameters, you can place each one in both the [mysqld] and [myisamchk] sections of an option file:


An alternative to using myisamchk is to use the REPAIR TABLE, ANALYZE TABLE, OPTIMIZE TABLE, or ALTER TABLE. These statements are performed by the server, which knows the proper full−text parameter values to use.


myisamchk supports the following options for table checking operations:

−−check, −c

Check the table for errors. This is the default operation if you specify no option that selects an operation type explicitly.

−−check−only−changed, −C

Check only tables that have changed since the last check.

−−extend−check, −e

Check the table very thoroughly. This is quite slow if the table has many indexes. This option should only be used in extreme cases. Normally, myisamchk or myisamchk −−medium−check should be able to determine whether there are any errors in the table.

If you are using −−extend−check and have plenty of memory, setting the key_buffer_size variable to a large value helps the repair operation run faster.

For a description of the output format, see the section called “MYISAMCHK TABLE INFORMATION”.

−−fast, −F

Check only tables that haven’t been closed properly.

−−force, −f

Do a repair operation automatically if myisamchk finds any errors in the table. The repair type is the same as that specified with the −−recover or −r option. States will be updated as with −−update−state.

−−information, −i

Print informational statistics about the table that is checked.

−−medium−check, −m

Do a check that is faster than an −−extend−check operation. This finds only 99.99% of all errors, which should be good enough in most cases.

−−read−only, −T

Do not mark the table as checked. This is useful if you use myisamchk to check a table that is in use by some other application that does not use locking, such as mysqld when run with external locking disabled.

−−update−state, −U

Store information in the .MYI file to indicate when the table was checked and whether the table crashed. This should be used to get full benefit of the −−check−only−changed option, but you shouldn’t use this option if the mysqld server is using the table and you are running it with external locking disabled.


myisamchk supports the following options for table repair operations (operations performed when an option such as −−recover or −−safe−recover is given):

−−backup, −B

Make a backup of the .MYD file as file_nametime.BAK


The directory where character sets are installed.


Correct the checksum information for the table.


Create missing keys. This assumes that the data file is correct and that the number of rows stored in the index file is correct. Enables −−quick.

−−data−file−length=len, −D len

The maximum length of the data file (when re−creating data file when it is “full”).

−−extend−check, −e

Do a repair that tries to recover every possible row from the data file. Normally, this also finds a lot of garbage rows. Do not use this option unless you are desperate.

For a description of the output format, see the section called “MYISAMCHK TABLE INFORMATION”.

−−force, −f

Overwrite old intermediate files (files with names like tbl_name.TMD) instead of aborting. Add another −−force to avoid ’myisam_sort_buffer_size is too small’ errors. In this case we will attempt to do the repair with the given myisam_sort_buffer_size and dynamically allocate as many management buffers as needed.

−−keys−used=val, −k val

For myisamchk, the option value is a bit−value that indicates which indexes to update. Each binary bit of the option value corresponds to a table index, where the first index is bit 0. An option value of 0 disables updates to all indexes, which can be used to get faster inserts. Deactivated indexes can be reactivated by using myisamchk −r.


Skip rows larger than the given length if myisamchk cannot allocate memory to hold them.

−−parallel−recover, −p

Use the same technique as −r and −n, but create all the keys in parallel, using different threads. This is beta−quality code. Use at your own risk!

−−quick, −q

Achieve a faster repair by modifying only the index file, not the data file. You can specify this option twice to force myisamchk to modify the original data file in case of duplicate keys. NOTE: Tables where the data file is corrupted can’t be fixed with this option.

−−recover, −r

Do a repair that can fix almost any problem except unique keys that are not unique (which is an extremely unlikely error with MyISAM tables). If you want to recover a table, this is the option to try first. You should try −−safe−recover only if myisamchk reports that the table cannot be recovered using −−recover. (In the unlikely case that −−recover fails, the data file remains intact.)

If you have lots of memory, you should increase the value of sort_buffer_size.

−−safe−recover, −o

Do a repair using an old recovery method that reads through all rows in order and updates all index trees based on the rows found. This is an order of magnitude slower than −−recover, but can handle a couple of very unlikely cases that −−recover cannot. This recovery method also uses much less disk space than −−recover. Normally, you should repair first using −−recover, and then with −−safe−recover only if −−recover fails.

If you have lots of memory, you should increase the value of key_buffer_size.


Specify the collation to use for sorting table indexes. The character set name is implied by the first part of the collation name.

−−sort−recover, −n

Force myisamchk to use sorting to resolve the keys even if the temporary files would be very large.

−−tmpdir=path, −t path

The path of the directory to be used for storing temporary files. If this is not set, myisamchk uses the value of the TMPDIR environment variable. tmpdir can be set to a list of directory paths that are used successively in round−robin fashion for creating temporary files. The separator character between directory names is the colon (“:”) on Unix and the semicolon (“;”) on Windows, NetWare, and OS/2.

−−unpack, −u

Unpack a table that was packed with myisampack.


myisamchk supports the following options for actions other than table checks and repairs:

−−analyze, −a

Analyze the distribution of key values. This improves join performance by enabling the join optimizer to better choose the order in which to join the tables and which indexes it should use. To obtain information about the key distribution, use a myisamchk −−description −−verbose tbl_name command or the SHOW INDEX FROM tbl_name statement.

−−block−search=offset, −b offset

Find the record that a block at the given offset belongs to.

−−description, −d

Print some descriptive information about the table. Specifying the −−verbose option once or twice produces additional information. See the section called “MYISAMCHK TABLE INFORMATION”.

−−set−auto−increment[=value], −A[value]

Force AUTO_INCREMENT numbering for new records to start at the given value (or higher, if there are existing records with AUTO_INCREMENT values this large). If value is not specified, AUTO_INCREMENT numbers for new records begin with the largest value currently in the table, plus one.

−−sort−index, −S

Sort the index tree blocks in high−low order. This optimizes seeks and makes table scans that use indexes faster.

−−sort−records=N, −R N

Sort records according to a particular index. This makes your data much more localized and may speed up range−based SELECT and ORDER BY operations that use this index. (The first time you use this option to sort a table, it may be very slow.) To determine a table’s index numbers, use SHOW INDEX, which displays a table’s indexes in the same order that myisamchk sees them. Indexes are numbered beginning with 1.

If keys are not packed (PACK_KEYS=0), they have the same length, so when myisamchk sorts and moves records, it just overwrites record offsets in the index. If keys are packed (PACK_KEYS=1), myisamchk must unpack key blocks first, then re−create indexes and pack the key blocks again. (In this case, re−creating indexes is faster than updating offsets for each index.)


Specifies how index statistics collection code should treat NULLs. Possible values of name are "nulls_unequal" (default), "nulls_equal" (emulate MySQL 4 behavior), and "nulls_ignored".


To obtain a description of a MyISAM table or statistics about it, use the commands shown here. The output from these commands is explained later in this section.

myisamchk −d tbl_name

Runs myisamchk in “describe mode” to produce a description of your table. If you start the MariaDB server with external locking disabled, myisamchk may report an error for a table that is updated while it runs. However, because myisamchk does not change the table in describe mode, there is no risk of destroying data.

myisamchk −dv tbl_name

Adding −v runs myisamchk in verbose mode so that it produces more information about the table. Adding −v a second time produces even more information.

myisamchk −eis tbl_name

Shows only the most important information from a table. This operation is slow because it must read the entire table.

myisamchk −eiv tbl_name

This is like −eis, but tells you what is being done.

The tbl_name argument can be either the name of a MyISAM table or the name of its index file, as described in myisamchk(1). Multiple tbl_name arguments can be given.

Suppose that a table named person has the following structure. (The MAX_ROWS table option is included so that in the example output from myisamchk shown later, some values are smaller and fit the output format more easily.)

last_name VARCHAR(20) NOT NULL,
first_name VARCHAR(20) NOT NULL,
birth DATE,
death DATE,
INDEX (last_name, first_name),
INDEX (birth)
) MAX_ROWS = 1000000;

Suppose also that the table has these data and index file sizes:

−rw−rw−−−− 1 mysql mysql 9347072 Aug 19 11:47 person.MYD
−rw−rw−−−− 1 mysql mysql 6066176 Aug 19 11:47 person.MYI

Example of myisamchk −dvv output:

MyISAM file: person
Record format: Packed
Character set: latin1_swedish_ci (8)
File−version: 1
Creation time: 2009−08−19 16:47:41
Recover time: 2009−08−19 16:47:56
Status: checked,analyzed,optimized keys
Auto increment key: 1 Last value: 306688
Data records: 306688 Deleted blocks: 0
Datafile parts: 306688 Deleted data: 0
Datafile pointer (bytes): 4 Keyfile pointer (bytes): 3
Datafile length: 9347072 Keyfile length: 6066176
Max datafile length: 4294967294 Max keyfile length: 17179868159
Recordlength: 54
table description:
Key Start Len Index Type Rec/key Root Blocksize
1 2 4 unique long 1 99328 1024
2 6 20 multip. varchar prefix 512 3563520 1024
27 20 varchar 512
3 48 3 multip. uint24 NULL 306688 6065152 1024
Field Start Length Nullpos Nullbit Type
1 1 1
2 2 4 no zeros
3 6 21 varchar
4 27 21 varchar
5 48 3 1 1 no zeros
6 51 3 1 2 no zeros

Explanations for the types of information myisamchk produces are given here. “Keyfile” refers to the index file. “Record” and “row” are synonymous, as are “field” and “column.”

The initial part of the table description contains these values:

• MyISAM file

Name of the MyISAM (index) file.

• Record format

The format used to store table rows. The preceding examples use Fixed length. Other possible values are Compressed and Packed. (Packed corresponds to what SHOW TABLE STATUS reports as Dynamic.)

• Chararacter set

The table default character set.

• File−version

Version of MyISAM format. Currently always 1.

• Creation time

When the data file was created.

• Recover time

When the index/data file was last reconstructed.

• Status

Table status flags. Possible values are crashed, open, changed, analyzed, optimized keys, and sorted index pages.

• Auto increment key, Last value

The key number associated the table’s AUTO_INCREMENT column, and the most recently generated value for this column. These fields do not appear if there is no such column.

• Data records

The number of rows in the table.

• Deleted blocks

How many deleted blocks still have reserved space. You can optimize your table to minimize this space. See Section 6.6.4, “MyISAM Table Optimization”.

• Datafile parts

For dynamic−row format, this indicates how many data blocks there are. For an optimized table without fragmented rows, this is the same as Data records.

• Deleted data

How many bytes of unreclaimed deleted data there are. You can optimize your table to minimize this space. See Section 6.6.4, “MyISAM Table Optimization”.

• Datafile pointer

The size of the data file pointer, in bytes. It is usually 2, 3, 4, or 5 bytes. Most tables manage with 2 bytes, but this cannot be controlled from MariaDB yet. For fixed tables, this is a row address. For dynamic tables, this is a byte address.

• Keyfile pointer

The size of the index file pointer, in bytes. It is usually 1, 2, or 3 bytes. Most tables manage with 2 bytes, but this is calculated automatically by MariaDB. It is always a block address.

• Max datafile length

How long the table data file can become, in bytes.

• Max keyfile length

How long the table index file can become, in bytes.

• Recordlength

How much space each row takes, in bytes.

The table description part of the output includes a list of all keys in the table. For each key, myisamchk displays some low−level information:

• Key

This key’s number. This value is shown only for the first column of the key. If this value is missing, the line corresponds to the second or later column of a multiple−column key. For the table shown in the example, there are two table description lines for the second index. This indicates that it is a multiple−part index with two parts.

• Start

Where in the row this portion of the index starts.

• Len

How long this portion of the index is. For packed numbers, this should always be the full length of the column. For strings, it may be shorter than the full length of the indexed column, because you can index a prefix of a string column. The total length of a multiple−part key is the sum of the Len values for all key parts.

• Index

Whether a key value can exist multiple times in the index. Possible values are unique or multip. (multiple).

• Type

What data type this portion of the index has. This is a MyISAM data type with the possible values packed, stripped, or empty.

• Root

Address of the root index block.

• Blocksize

The size of each index block. By default this is 1024, but the value may be changed at compile time when MariaDB is built from source.

• Rec/key

This is a statistical value used by the optimizer. It tells how many rows there are per value for this index. A unique index always has a value of 1. This may be updated after a table is loaded (or greatly changed) with myisamchk −a. If this is not updated at all, a default value of 30 is given.

The last part of the output provides information about each column:

• Field

The column number.

• Start

The byte position of the column within table rows.

• Length

The length of the column in bytes.

• Nullpos, Nullbit

For columns that can be NULL, MyISAM stores NULL values as a flag in a byte. Depending on how many nullable columns there are, there can be one or more bytes used for this purpose. The Nullpos and Nullbit values, if nonempty, indicate which byte and bit contains that flag indicating whether the column is NULL.

The position and number of bytes used to store NULL flags is shown in the line for field 1. This is why there are six Field lines for the person table even though it has only five columns.

• Type

The data type. The value may contain any of the following descriptors:

• constant

All rows have the same value.

• no endspace

Do not store endspace.

• no endspace, not_always

Do not store endspace and do not do endspace compression for all values.

• no endspace, no empty

Do not store endspace. Do not store empty values.

• table−lookup

The column was converted to an ENUM.

• zerofill(N)

The most significant N bytes in the value are always 0 and are not stored.

• no zeros

Do not store zeros.

• always zero

Zero values are stored using one bit.

• Huff tree

The number of the Huffman tree associated with the column.

• Bits

The number of bits used in the Huffman tree.

The Huff tree and Bits fields are displayed if the table has been compressed with myisampack. See myisampack(1), for an example of this information.

Example of myisamchk −eiv output:

Checking MyISAM file: person
Data records: 306688 Deleted blocks: 0
− check file−size
− check record delete−chain
No recordlinks
− check key delete−chain
block_size 1024:
− check index reference
− check data record references index: 1
Key: 1: Keyblocks used: 98% Packed: 0% Max levels: 3
− check data record references index: 2
Key: 2: Keyblocks used: 99% Packed: 97% Max levels: 3
− check data record references index: 3
Key: 3: Keyblocks used: 98% Packed: −14% Max levels: 3
Total: Keyblocks used: 98% Packed: 89%
− check records and index references

Records: 306688 M.recordlength: 25 Packed: 83%
Recordspace used: 97% Empty space: 2% Blocks/Record: 1.00
Record blocks: 306688 Delete blocks: 0
Record data: 7934464 Deleted data: 0
Lost space: 256512 Linkdata: 1156096
User time 43.08, System time 1.68
Maximum resident set size 0, Integral resident set size 0
Non−physical pagefaults 0, Physical pagefaults 0, Swaps 0
Blocks in 0 out 7, Messages in 0 out 0, Signals 0
Voluntary context switches 0, Involuntary context switches 0
Maximum memory usage: 1046926 bytes (1023k)

myisamchk −eiv output includes the following information:

• Data records

The number of rows in the table.

• Deleted blocks

How many deleted blocks still have reserved space. You can optimize your table to minimize this space. See Section 6.6.4, “MyISAM Table Optimization”.

• Key

The key number.

• Keyblocks used

What percentage of the keyblocks are used. When a table has just been reorganized with myisamchk, the values are very high (very near theoretical maximum).

• Packed

MariaDB tries to pack key values that have a common suffix. This can only be used for indexes on CHAR and VARCHAR columns. For long indexed strings that have similar leftmost parts, this can significantly reduce the space used. In the preceding example, the second key is 40 bytes long and a 97% reduction in space is achieved.

• Max levels

How deep the B−tree for this key is. Large tables with long key values get high values.

• Records

How many rows are in the table.

• M.recordlength

The average row length. This is the exact row length for tables with fixed−length rows, because all rows have the same length.

• Packed

MariaDB strips spaces from the end of strings. The Packed value indicates the percentage of savings achieved by doing this.

• Recordspace used

What percentage of the data file is used.

• Empty space

What percentage of the data file is unused.

• Blocks/Record

Average number of blocks per row (that is, how many links a fragmented row is composed of). This is always 1.0 for fixed−format tables. This value should stay as close to 1.0 as possible. If it gets too large, you can reorganize the table. See Section 6.6.4, “MyISAM Table Optimization”.

• Recordblocks

How many blocks (links) are used. For fixed−format tables, this is the same as the number of rows.

• Deleteblocks

How many blocks (links) are deleted.

• Recorddata

How many bytes in the data file are used.

• Deleted data

How many bytes in the data file are deleted (unused).

• Lost space

If a row is updated to a shorter length, some space is lost. This is the sum of all such losses, in bytes.

• Linkdata

When the dynamic table format is used, row fragments are linked with pointers (4 to 7 bytes each). Linkdata is the sum of the amount of storage used by all such pointers.


Memory allocation is important when you run myisamchk. myisamchk uses no more memory than its memory−related variables are set to. If you are going to use myisamchk on very large tables, you should first decide how much memory you want it to use. The default is to use only about 3MB to perform repairs. By using larger values, you can get myisamchk to operate faster. For example, if you have more than 32MB RAM, you could use options such as these (in addition to any other options you might specify):

shell> myisamchk −−sort_buffer_size=16M \
−−key_buffer_size=16M \
−−read_buffer_size=1M \
−−write_buffer_size=1M ...

Using −−sort_buffer_size=16M should probably be enough for most cases.

Be aware that myisamchk uses temporary files in TMPDIR. If TMPDIR points to a memory file system, out of memory errors can easily occur. If this happens, run myisamchk with the −−tmpdir=path option to specify a directory located on a file system that has more space.

When performing repair operations, myisamchk also needs a lot of disk space:

• Twice the size of the data file (the original file and a copy). This space is not needed if you do a repair with −−quick; in this case, only the index file is re−created. This space must be available on the same file system as the original data file, as the copy is created in the same directory as the original.

• Space for the new index file that replaces the old one. The old index file is truncated at the start of the repair operation, so you usually ignore this space. This space must be available on the same file system as the original data file.

• When using −−recover or −−sort−recover (but not when using −−safe−recover), you need space on disk for sorting. This space is allocated in the temporary directory (specified by TMPDIR or −−tmpdir=path). The following formula yields the amount of space required:

(largest_key + row_pointer_length) × number_of_rows × 2

You can check the length of the keys and the row_pointer_length with myisamchk −dv tbl_name (see the section called “MYISAMCHK TABLE INFORMATION”). The row_pointer_length and number_of_rows values are the Datafile pointer and Data records values in the table description. To determine the largest_key value, check the Key lines in the table description. The Len column indicates the number of bytes for each key part. For a multiple−column index, the key size is the sum of the Len values for all key parts.

If you have a problem with disk space during repair, you can try −−safe−recover instead of −−recover.


Copyright 2007-2008 MySQL AB, 2008-2010 Sun Microsystems, Inc., 2010-2020 MariaDB Foundation

This documentation is free software; you can redistribute it and/or modify it only under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License.

This documentation is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with the program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335 USA or see


For more information, please refer to the MariaDB Knowledge Base, available online at


MariaDB Foundation (

Updated 2024-01-29 - |