mbim-network - Simple network management of MBIM devices

NAME SYNOPSIS DESCRIPTION Commands: OPTIONS COPYRIGHT SEE ALSO

NAME

mbim-network − Simple network management of MBIM devices

SYNOPSIS

mbim-network [OPTIONS] [DEVICE] [COMMAND]

DESCRIPTION

Simple network management of MBIM devices

Commands:

	start		Start network connection
	stop		Stop network connection
	status		Query network connection status

OPTIONS

−−profile=[PATH]

Use the profile in the specified path

−−help, −h

Show help options

−−version

Show version

Notes:

1) [DEVICE] is given as the full path to the cdc−wdm character device, e.g.:

/dev/cdc−wdm0

2) The mbim−network script requires a profile to work. Unless explicitly specified with ‘−−profile’, the file is assumed to be available in the following path:

/etc/mbim−network.conf

3) The APN to use should be configured in the profile, in the following way (e.g. assuming APN is called ’internet’):

APN=internet

4) Optional APN user/password strings may be given in the following way:

APN_USER=user APN_PASS=password

5) If APN user/password is specified, the authentication protocol to use (one of PAP, CHAP or MSCHAPV2) must also be specified in the following way:

APN_AUTH=protocol

6) If you want to instruct the mbim−network script to use the mbim−proxy setup, you can do so by configuring the following line in the profile:

PROXY=yes

7) Once the mbim−network script reports a successful connection you still need to run a DHCP client on the associated WWAN network interface.

Copyright © 2013−2021 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl−2.0.html>
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.