efru - HomePlug AV Packet Listener
efru [options]
Display incoming 802.3 Ethernet frames addressed to this host or broadcast. Do not display outgoing frames.
The program is an example of a simple packet listener. Engineers and software developers can extend this code to build custom sniffers or servers. The framework is present here but you must add any additional features.
This program is part of the Qualcomm Atheros Powerline Toolkit. See the plc man page for an overview and installation instructions.
-e ethertype
The protocol (or ethertype) of interest expressed as a 16-bit hexadecimal integer. Prefix "0x" is optional. This filters out frames having any other ethertype. The default is ETH_P_802_2 as defined in if_ether.h.
-i interface
Names the host ethernet interface to watch. The named interface, such as eth0, eth1 and so on, must be connected to a HomePlug AV ethernet-to-powerline bridge adapter to receive any HomePlug AV traffic. The default interface is eth1.
|
-q |
Quiet mode. Suppress the printing of the normal message descriptions on stdout. |
-t milliseconds
Read timeout in milliseconds. Values range from 0 through UINT_MAX. This is the maximum time allowed for a response. The default is 50 milliseconds.
|
-v |
Verbose mode. Displays incoming frames in hexadecimal dump format on stdout. This option is independent of option -a which prints VS_ARPC message text on stderr. |
-?, --help
Print program help summary on stdout. This option takes precedence over other options on the command line.
-!, --version
Print program version information on stdout. This option takes precedence over other options on the command line. Use this option when sending screen dumps to Atheros Technical Support so that they know exactly which version of the Linux Toolkit you are using. See the HomePlug AV Specification for a description of all HomePlug AV message types. See the Qualcomm Atheros INT6000 Firmware Reference Manual for a description of Atheros Vendor Specific message types.
The following command monitors the default interface eth1 for HomePlug AV traffic and dumps detected frames on the console as they occur. Terminate the foreground process by typing ˆC or ˆZ at the console. This program is usually run in a separate console window when performing other toolkit operations.
# efru
The following command monitors host interface eth4 for incoming HomePlug AV frames and dumps writes them to file efru.log. Frames are printed in hexadecimal dump format because option -v is present. Terminate the foreground process by typing ˆC or ˆZ at the console.
# efru -v -i eth4 > efru.log
Atheros HomePlug AV Vendor Specific Management Message structure and content is proprietary to Qualcomm Atheros, Ocala FL USA. Consequently, public information is not available. Qualcomm Atheros reserves the right to modify management message structure and content in future firmware releases without any obligation to notify or compensate users of this program.
plc(1), efsu(1), hpav(1), hpavd(1), mme(1)
Charles Maier