http - Central server for RPC and the message database

Name Synopsis Description Options URI processing order RPC-over-HTTP Configuration directives (gromox.cfg) Configuration directives (http.cfg) Files Normative references See also

Name

http — Central server for RPC and the message database

http(8gx) is a trivial HTTP server. It understands the special HTTP methods as used by RPC-over-HTTP protocol as used by Outlook, it can serve files verbatim, or forward requests to a FastCGI server such as php-fpm(8).

Options

−c config

Read configuration directives from the given file. If this option is not specified, /etc/gromox/http.cfg will be read if it exists.

−?

Display option summary.

URI processing order

	•		Requests are passed to the mod_rewrite(4gx) module (built-in) to have their URI potentially rewritten.
	•		If a HTTP request is using the methods RPC_IN_DATA or RPC_OUT_DATA, the data stream is handed off to the exchange_emsmdb(4gx) plugin.
	•		Otherwise, HTTP processing modules (HPM) are invoked. Processing ends when one module signals that the request was handled. The order depends on the HPM list (which is fixed): ews, mh_emsmdb, mh_nsp, oxdisco, oab.
	•		Otherwise, the mod_fastcgi(4gx) module (built-in) is invoked. Processing ends if the module handled the request.
	•		Otherwise, the mod_cache(4gx) module (built-in) is invoked. Processing ends if the module handled the request.
	•		Otherwise, the request is rejected.

RPC-over-HTTP

RPC-over-HTTP utilizes two special HTTP methods, RPC_IN_DATA and RPC_OUT_DATA. These requests can, similarly to HTTP CONNECT, be very long-lived. The RPC data stream is handled by the included exchange_emsmdb(4gx) plugin.

All time-based command-line options and configuration file directives are subject to the syntax described in gromox(7), section "Duration specifications".

Configuration directives (gromox.cfg)

The following directives are recognized when reading from /etc/gromox/gromox.cfg, or when the −c option is used to specify a custom file:
daemons_fd_limit

In gromox-http, this is treated as an alias for http_fd_limit.

http_basic_auth_cred_caching

Perform credential caching for HTTP Basic.
Default: 1minute

http_fd_limit

Request that the file descriptor table be at least this large. The magic value 0 indicates that the system default hard limit (rlim_max, cf. setrlimit(2)) should be used.
Default: 0

http_remote_host_hdr

The name of the HTTP request header which contains the actual client IPv6/IPv4 address. When a (reverse) proxy is placed in front of gromox-http, the address gxhttp normally sees is the proxy address (e.g. ::1). If the proxy sets a custom header to convey the actual client address, Gromox can pick this up for its own reporting, which in turn is useful for e.g. fail2ban setups.
Default: (empty)

Configuration directives (http.cfg)

The following directives are recognized when reading from /etc/gromox/http.cfg, or when the −c option is used to specify a custom file:
block_interval_auths

The amount of time a user is blocked from connecting to the service after too many failed logins.
Default: 1 minute

config_file_path

Colon-separated list of directories which will be scanned when locating further configuration files, especially those used by plugin instances.
Default: /etc/gromox/http:/etc/gromox

context_average_mem

Default: 256K

context_num

Default: 400

data_file_path

Colon-separated list of directories which will be scanned when locating data files.
Default: /usr/share/gromox/http

fastcgi_exec_timeout

Maximum execution time for CGI scripts.
Default: 10 minutes

gss_program

The helper program to use for authenticating SPNEGO-GSS requests. The value is rudimentarily tokenized at whitespaces, so no special characters may be used. (If you need to, write a shell wrapper.) The special value "internal-gss" uses libgssapi directly. The use of Squid’s negotiate_wrapper_auth is optional; Gromox can identify whether requests are SPNEGO-NTLMSSP or SPNEGO-Kerberos in the same fashion as negotiate_wrapper_auth does.
Default: internal−gss
Example: /usr/lib/squid/negotiate_kerberos_auth −s GSS_C_NO_NAME
Example: /usr/lib/squid/negotiate_wrapper_auth −−ntlm /usr/bin/ntlm_auth −−helper−protocol=squid−2.5−ntlmssp −−kerberos /usr/lib/squid/negotiate_kerberos_auth −s GSS_C_NO_NAME

host_id

A unique identifier for this system. It is used for the Server HTTP responses header, for service plugins like exmdb_provider(4gx), which makes use of it for SMTP HELO lines, for DSN report texts, for MIDB database/EML cache. The identifier should only use characters allowed for hostnames.
Default: (system hostname)

http_auth_basic

Enable HTTP Basic authentication.
Default: yes

http_auth_spnego

Enable HTTP Negotiate authentication.
Default: no

http_auth_times

The number of login tries a user is allowed before the account is blocked.
Default: 10

http_certificate_passwd

The password to unlock TLS certificates.
Default: (unset)

http_certificate_path

A colon-separated list of TLS certificate files. The complete certificate chain should be present (as there is no other config directive to pull CA certs in, and implicit loading from system directories is not guaranteed by Gromox).
Default: (unset)

http_conn_timeout

If a HTTP connection is inactive for the given period, the connection is terminated.
Default: 3 minutes

http_debug

If set to 1, prints all incoming and outgoing HTTP traffic to stderr (not http_log_file!).
Default: 0

http_enforce_auth

Enforce authentication at all times. This is a debugging knob.
Default: no

http_krb_service_principal

Default: gromox@host_id

http_listen_addr

AF_INET6 socket address to bind the HTTP service to.
Default: ::

http_listen_port

The TCP port to expose the HTTP protocol service on.
Default: 80

http_listen_tls_port

The TCP port to expose implicit-TLS HTTP protocol service (HTTPS) on.
Default: (unset)

http_log_file

Target for log messages here. Special values: "-" (stderr/syslog depending on parent PID) or "syslog" are recognized.
Default: - (auto)

http_log_level

Maximum verbosity of logging. 1=crit, 2=error, 3=warn, 4=notice, 5=info, 6=debug.
Default: 4 (notice)

http_private_key_path

A colon-separated list of TLS certificate private key files.
Default: (unset)

http_rqbody_flush_size

If the HTTP request to a CGI endpoint has a HTTP body larger than the limit given here, the data is buffered in a file rather than kept in memory. If the request uses Chunked Transfer Encoding, a file is used unconditionally.
Default: 512K

http_rqbody_max_size

If the Content-Length of a HTTP request to a CGI endpoint is larger than this value, the request is rejected.
Default: 50M

http_support_tls

This flag controls whether (or not) the server offers TLS at all. The default is false because you need a certificate for this first.
Default: false

http_thread_charge_num

Connection load factor (oversubscription ratio) for a processing thread.
Default: 20

http_thread_init_num

The initial and also minimum number of client processing threads to keep around. This is similar to php-fpm’s start_servers/min_spare_servere. (The maximum number of threads, i.e. what would be max_spare_servers, is determined by: context_num divided by imap_thread_charge_num)
Default: 5

msrpc_debug

Log every completed RPC call and the return code of the operation in a minimal fashion to stderr. Level 1 emits RPCs with a failure return code, level 2 emits all RPCs. Note the daemon log level needs to be "debug" (6), too.
Default: 0

ntlmssp_program

Path to samba-winbind ntlm_auth or equivalent program that implements the Squid authentication helper text protocol ("YR, TT, KK, AF"). The value is rudimentarily tokenized at whitespaces, so no special characters may be used. (If you need to, write a shell wrapper.) The use of Squid’s negotiate_wrapper_auth is optional; Gromox can identify whether requests are SPNEGO-NTLMSSP or SPNEGO-Kerberos in the same fashion as negotiate_wrapper_auth does.
Default: /usr/bin/ntlm_auth −−helper−protocol=squid−2.5−ntlmssp
Example: /usr/lib/squid/negotiate_wrapper_auth −−ntlm /usr/bin/ntlm_auth −−helper−protocol=squid−2.5−ntlmssp −−kerberos /usr/lib/squid/negotiate_kerberos_auth −s GSS_C_NO_NAME

request_max_mem

The maximum hint size for fragmented RPC PDU requests that will be allowed (C706 Â§12.6.3.7, MS-RPCE v33 Â§2.2.2.6).
Default: 4M

tls_min_proto

The lowest TLS version to offer. Possible values are: tls1.0, tls1.1, tls1.2, and, if supported by the system, tls1.3.
Default: tls1.2

running_identity

An unprivileged user account to switch the process to after startup. To inhibit the switch, assign the empty value.
Default: gromox

tcp_mss_size

Sets the TCP_MAXSEG socket option with the given MSS value for the listening socket(s), cf. tcp(7).
Default: 0 (do not limit the MSS)

user_default_lang

Default: en

Files

	•		/usr/lib/gromox/libgxh_*.so: HTTP processing plugins
	•		/usr/lib/gromox/libgxp_*.so: PDU processing plugins
	•		/usr/lib/gromox/libgxs_*.so: service plugins

Normative references

	•		MS-RPCE: Remote Procedure Call Protocol Extensions
	•		DCERPC / C706: Technical Standard DCE 1.1: Remote Procedure Call by The Open Group, 1997