ipfixcol2-timecheck-output - Time Check (output plugin)
NAME DESCRIPTION EXAMPLE CONFIGURATION PARAMETERS AUTHOR COPYRIGHTNAME
ipfixcol2-timecheck-output − Time Check (output plugin)
DESCRIPTION
The plugin checks that start and end timestamps of each flow record are relatively recent. Based on configured parameters it reports flows with timestamps from the future (i.e. greater than the current system time) and timestamps from the distant past.
Timestamp anomalies are usually caused by missing clock synchronization (e.g. NTP) or invalid implementation on side of the exporter. If the anomaly is detected, the plugin will print details on the standard output.
Only following standard IANA timestamps are supported:
|
• |
ID 150 (flowStartSeconds) |
|||
|
• |
ID 151 (flowEndSeconds) |
|||
|
• |
ID 152 (flowStartMilliseconds) |
|||
|
• |
ID 153 (flowEndMilliseconds) |
|||
|
• |
ID 154 (flowStartMicroseconds) |
|||
|
• |
ID 155 (flowEndMicroseconds) |
|||
|
• |
ID 156 (flowStartNanoseconds) |
|||
|
• |
ID 157 (flowEndNanoseconds) |
EXAMPLE CONFIGURATION
<output>
<name>TimeCheck output</name>
<plugin>timecheck</plugin>
<params>
<devPast>600</devPast>
<devFuture>0</devFuture>
</params>
</output>
PARAMETERS
devPast
Maximum allowed deviation between the current system time and timestamps from the past in seconds. The value must be greater than active and inactive timeouts of exporters and must also include a possible delay between expiration and processing on the collector. For example, let's say that active timeout and inactive timeout are 5 minutes and 30 seconds, respectively. Value 600 (i.e. 10 minutes) should be always enough for all flow data to be received and processed at the collector.
devFuture
Maximum allowed deviation between the current time and timestamps from the future in seconds. The collector should never receive flows with timestamp from the future, therefore, the value should be usually set to 0.
AUTHOR
Lukáš Huták ([email protected])
COPYRIGHT
Copyright © 2019 CESNET, z.s.p.o.