alienfile − Specification for defining an external dependency for CPAN
version 2.80
Do-it-yourself approach:
use alienfile;
probe [ 'pkg−config −−exists libarchive'
];
share {
start_url
'http://libarchive.org/downloads/libarchive−3.2.2.tar.gz';
# the first one which succeeds will be used
download [ 'wget %{.meta.start_url}' ];
download [ 'curl −o %{.meta.start_url}' ];
extract [ 'tar xf %{.install.download}' ];
build [
# Note: will not work on Windows, better to use
Build::Autoconf plugin
# if you need windows support
'./configure −−prefix=%{.install.prefix}
−−disable−shared',
'%{make}',
'%{make} install',
];
}
gather [
[ 'pkg−config', '−−modversion',
'libarchive', \'%{.runtime.version}' ],
[ 'pkg−config', '−−cflags', 'libarchive',
\'%{.runtime.cflags}' ],
[ 'pkg−config', '−−libs', 'libarchive',
\'%{.runtime.libs}' ],
];
With plugins (better):
use alienfile;
plugin 'PkgConfig' => 'libarchive';
share {
start_url 'http://libarchive.org/downloads/';
plugin Download => (
filter => qr/ˆlibarchive−.*\.tar\.gz$/,
version => qr/([0−9\.]+)/,
);
plugin Extract => 'tar.gz';
plugin 'Build::Autoconf';
plugin 'Gather::IsolateDynamic';
build [
'%{configure}',
'%{make}',
'%{make} install',
];
};
An alienfile is a recipe used by Alien::Build to, probe for system libraries or download from the internet, and build source for those libraries. This document acts as reference for the alienfile system, but if you are starting out writing your own Alien you should read Alien::Build::Manual::AlienAuthor, which will teach you how to write your own complete Alien using alienfile + Alien::Build + ExtUtils::MakeMaker. Special attention should be taken to the section "a note about dynamic vs. static libraries".
"any" requirement (either share or system):
requires
$module;
requires $module => $version;
configure time requirement:
configure {
requires $module;
requires $module => $version;
};
system requirement:
sys {
requires $module;
requires $module => $version;
};
share requirement:
share {
requires $module;
requires $module => $version;
};
specifies a
requirement. Alien::Build takes advantage of dynamic
requirements, so only modules that are needed for the
specific type of install need to be loaded. Here are the
different types of requirements:
configure
Configure requirements should already be installed before the alienfile is loaded.
|
any |
"Any" requirements are those that are needed either for the probe stage, or in either the system or share installs. |
share
Share requirements are those modules needed when downloading and building from source.
system
System requirements are those modules needed when the system provides the library or tool.
plugin $name
=> (%args);
plugin $name => $arg;
Load the given plugin. If you prefix the plugin name with an "=" sign, then it will be assumed to be a fully qualified path name. Otherwise the plugin will be assumed to live in the "Alien::Build::Plugin" namespace. If there is an appropriate negotiate plugin, that one will be loaded. Examples:
# Loads
Alien::Build::Plugin::Fetch::Negotiate
# which will pick the best Alien::Build::Plugin::Fetch
# plugin based on the URL, and system configuration
plugin 'Fetch' => 'http://ftp.gnu.org/gnu/gcc';
# loads the plugin with the badly named class!
plugin
'=Badly::Named::Plugin::Not::In::Alien::Build::Namespace';
# explicitly loads
Alien::Build::Plugin::Prefer::SortVersions
plugin 'Prefer::SortVersions' => (
filter => qr/ˆgcc−.*\.tar\.gz$/,
version => qr/([0−9\.]+)/,
);
probe
\&code;
probe \@commandlist;
Instructions for the probe stage. May be either a code reference, or a command list. Multiple probes and probe plugins can be given. These will be used in sequence, stopping at the first that detects a system installation. Alien::Build will use a share install if no system installation is detected by the probes.
configure {
...
};
Configure block. The only directive allowed in a configure block is requires.
sys {
...
};
System block. Allowed directives are: requires and gather.
share {
...
};
System block. Allowed directives are: download, fetch, decode, prefer, extract, build, gather.
share {
start_url $url;
};
Set the start URL for download. This should be the URL to an index page, or the actual tarball of the source.
[experimental]
share {
digest $algorithm, $digest;
};
Check fetched and downloaded files against the given algorithm and digest. Typically you will want to use SHA256 as the algorithm.
share {
download \&code;
download \@commandlist;
};
Instructions for the download stage. May be either a code reference, or a command list.
share {
fetch \&code;
fetch \@commandlist;
};
Instructions for the fetch stage. May be either a code reference, or a command list.
share {
decode \&code;
decode \@commandlist;
};
Instructions for the decode stage. May be either a code reference, or a command list.
share {
prefer \&code;
prefer \@commandlist;
};
Instructions for the prefer stage. May be either a code reference, or a command list.
share {
extract \&code;
extract \@commandlist;
};
Instructions for the extract stage. May be either a code reference, or a command list.
share {
patch \&code;
patch \@commandlist;
};
Instructions for the patch stage. May be either a code reference, or a command list.
share {
patch_ffi \&code;
patch_ffi \@commandlist;
};
[DEPRECATED]
Instructions for the patch_ffi stage. May be either a code reference, or a command list.
share {
build \&code;
build \@commandlist;
};
Instructions for the build stage. May be either a code reference, or a command list.
share {
build \&code;
build \@commandlist;
};
[DEPRECATED]
Instructions for the build FFI stage. Builds shared libraries instead of static. This is optional, and is only necessary if a fresh and separate build needs to be done for FFI.
gather
\&code;
gather \@commandlist;
share {
gather \&code;
gather \@commandlist;
};
sys {
gather \&code;
gather \@commandlist;
};
Instructions for the gather stage. May be either a code reference, or a command list. In the root block of the alienfile it will trigger in both share and system build. In the share or sys block it will only trigger in the corresponding build.
share {
gather_ffi \&code;
gather_ffi \@commandlist;
}
[DEPRECATED]
Gather specific to "build_ffi". Not usually necessary.
share {
ffi {
patch \&code;
patch \@commandlist;
build \&code;
build \@commandlist;
gather \&code;
gather \@commandlist;
}
}
Specify patch, build or gather stages related to FFI.
my $hash = meta_prop;
Get the meta_prop hash reference.
my $meta = meta;
Returns the meta object for your alienfile. For methods that can be used on the meta object, see "META METHODS" in Alien::Build.
log($message);
Prints the given log to stdout.
share {
test \&code;
test \@commandlist;
};
sys {
test \&code;
test \@commandlist;
};
Run the tests
before $stage => \&code;
Execute the given code before the given stage. Stage should be one of "probe", "download", "fetch", "decode", "prefer", "extract", "patch", "build", "test", and "gather".
The before directive is only legal in the same blocks as the stage would normally be legal in. For example, you can’t do this:
use alienfile;
sys {
before 'build' => sub {
...
};
};
Because a "build" wouldn’t be legal inside a "sys" block.
after $stage => \&code;
Execute the given code after the given stage. Stage should be one of "probe", "download", "fetch", "decode", "prefer", "extract", "patch", "build", "test", and "gather".
The after directive is only legal in the same blocks as the stage would normally be legal in. For example, you can’t do this:
use alienfile;
sys {
after 'build' => sub {
...
};
};
Because a "build" wouldn’t be legal inside a "sys" block.
Alien
Alien::Build
Alien::Build::MM
Alien::Base
Author: Graham Ollis <[email protected]>
Contributors:
Diab Jerius (DJERIUS)
Roy Storey (KIWIROY)
Ilya Pavlov
David Mertens (run4flat)
Mark Nunberg (mordy, mnunberg)
Christian Walde (Mithaldu)
Brian Wightman (MidLifeXis)
Zaki Mughal (zmughal)
mohawk (mohawk2, ETJ)
Vikas N Kumar (vikasnkumar)
Flavio Poletti (polettix)
Salvador Fandiño (salva)
Gianni Ceccarelli (dakkar)
Pavel Shaydo (zwon, trinitum)
Kang-min Liu (å康æ°, gugod)
Nicholas Shipp (nshp)
Juan Julián Merelo Guervós (JJ)
Joel Berger (JBERGER)
Petr PÃsaÅ (ppisar)
Lance Wicks (LANCEW)
Ahmad Fatoum (a3f, ATHREEF)
José JoaquÃn Atria (JJATRIA)
Duke Leto (LETO)
Shoichi Kaji (SKAJI)
Shawn Laffan (SLAFFAN)
Paul Evans (leonerd, PEVANS)
Håkon Hægland (hakonhagland, HAKONH)
nick nauwelaerts (INPHOBIA)
Florian Weimer
This software is copyright (c) 2011−2022 by Graham Ollis.
This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.