ONVIF::Device::Interfaces::Device::DevicePort − SOAP Interface for the Device Web Service
use
ONVIF::Device::Interfaces::Device::DevicePort;
my $interface =
ONVIF::Device::Interfaces::Device::DevicePort−>new();
my $response;
$response = $interface−>GetServices();
$response = $interface−>GetServiceCapabilities();
$response = $interface−>GetDeviceInformation();
$response = $interface−>SetSystemDateAndTime();
$response = $interface−>GetSystemDateAndTime();
$response = $interface−>SetSystemFactoryDefault();
$response = $interface−>UpgradeSystemFirmware();
$response = $interface−>SystemReboot();
$response = $interface−>RestoreSystem();
$response = $interface−>GetSystemBackup();
$response = $interface−>GetSystemLog();
$response =
$interface−>GetSystemSupportInformation();
$response = $interface−>GetScopes();
$response = $interface−>SetScopes();
$response = $interface−>AddScopes();
$response = $interface−>RemoveScopes();
$response = $interface−>GetDiscoveryMode();
$response = $interface−>SetDiscoveryMode();
$response = $interface−>GetRemoteDiscoveryMode();
$response = $interface−>SetRemoteDiscoveryMode();
$response = $interface−>GetDPAddresses();
$response = $interface−>GetEndpointReference();
$response = $interface−>GetRemoteUser();
$response = $interface−>SetRemoteUser();
$response = $interface−>GetUsers();
$response = $interface−>CreateUsers();
$response = $interface−>DeleteUsers();
$response = $interface−>SetUser();
$response = $interface−>GetWsdlUrl();
$response = $interface−>GetCapabilities();
$response = $interface−>SetDPAddresses();
$response = $interface−>GetHostname();
$response = $interface−>SetHostname();
$response = $interface−>SetHostnameFromDHCP();
$response = $interface−>GetDNS();
$response = $interface−>SetDNS();
$response = $interface−>GetNTP();
$response = $interface−>SetNTP();
$response = $interface−>GetDynamicDNS();
$response = $interface−>SetDynamicDNS();
$response = $interface−>GetNetworkInterfaces();
$response = $interface−>SetNetworkInterfaces();
$response = $interface−>GetNetworkProtocols();
$response = $interface−>SetNetworkProtocols();
$response = $interface−>GetNetworkDefaultGateway();
$response = $interface−>SetNetworkDefaultGateway();
$response = $interface−>GetZeroConfiguration();
$response = $interface−>SetZeroConfiguration();
$response = $interface−>GetIPAddressFilter();
$response = $interface−>SetIPAddressFilter();
$response = $interface−>AddIPAddressFilter();
$response = $interface−>RemoveIPAddressFilter();
$response = $interface−>GetAccessPolicy();
$response = $interface−>SetAccessPolicy();
$response = $interface−>CreateCertificate();
$response = $interface−>GetCertificates();
$response = $interface−>GetCertificatesStatus();
$response = $interface−>SetCertificatesStatus();
$response = $interface−>DeleteCertificates();
$response = $interface−>GetPkcs10Request();
$response = $interface−>LoadCertificates();
$response = $interface−>GetClientCertificateMode();
$response = $interface−>SetClientCertificateMode();
$response = $interface−>GetRelayOutputs();
$response = $interface−>SetRelayOutputSettings();
$response = $interface−>SetRelayOutputState();
$response = $interface−>SendAuxiliaryCommand();
$response = $interface−>GetCACertificates();
$response =
$interface−>LoadCertificateWithPrivateKey();
$response =
$interface−>GetCertificateInformation();
$response = $interface−>LoadCACertificates();
$response = $interface−>CreateDot1XConfiguration();
$response = $interface−>SetDot1XConfiguration();
$response = $interface−>GetDot1XConfiguration();
$response = $interface−>GetDot1XConfigurations();
$response = $interface−>DeleteDot1XConfiguration();
$response = $interface−>GetDot11Capabilities();
$response = $interface−>GetDot11Status();
$response =
$interface−>ScanAvailableDot11Networks();
$response = $interface−>GetSystemUris();
$response = $interface−>StartFirmwareUpgrade();
$response = $interface−>StartSystemRestore();
SOAP Interface for the Device web service located at http://www.examples.com/Device/.
new
Constructor.
All arguments are forwarded to SOAP::WSDL::Client.
Method synopsis is displayed with hash refs as parameters.
The commented class names in the method’s parameters denote that objects of the corresponding class can be passed instead of the marked hash ref.
You may pass any combination of objects, hash and list refs to these methods, as long as you meet the structure.
List items (i.e. multiple occurrences) are not displayed in the synopsis. You may generally pass a list ref of hash refs (or objects) instead of a hash ref − this may result in invalid XML if used improperly, though. Note that SOAP::WSDL always expects list references at maximum depth position.
XML attributes are not displayed in this synopsis and cannot be set using hash refs. See the respective class’ documentation for additional information.
GetServices
Returns information about services on the device.
Returns a ONVIF::Device::Elements::GetServicesResponse object.
$response =
$interface−>GetServices( {
IncludeCapability => $some_value, # boolean
},,
);
GetServiceCapabilities
Returns the capabilities of the device service. The result is returned in a typed answer.
Returns a ONVIF::Device::Elements::GetServiceCapabilitiesResponse object.
$response =
$interface−>GetServiceCapabilities( {
},,
);
GetDeviceInformation
This operation gets basic device information from the device.
Returns a ONVIF::Device::Elements::GetDeviceInformationResponse object.
$response =
$interface−>GetDeviceInformation( {
},,
);
SetSystemDateAndTime
The DayLightSavings flag should be set to true to activate any DST settings of the TimeZone string. Clear the DayLightSavings flag if the DST portion of the TimeZone settings should be ignored.
Returns a ONVIF::Device::Elements::SetSystemDateAndTimeResponse object.
$response =
$interface−>SetSystemDateAndTime( {
DateTimeType => $some_value, # SetDateTimeType
DaylightSavings => $some_value, # boolean
TimeZone => { # ONVIF::Device::Types::TimeZone
TZ => $some_value, # token
},
UTCDateTime => { # ONVIF::Device::Types::DateTime
Time => { # ONVIF::Device::Types::Time
Hour => $some_value, # int
Minute => $some_value, # int
Second => $some_value, # int
},
Date => { # ONVIF::Device::Types::Date
Year => $some_value, # int
Month => $some_value, # int
Day => $some_value, # int
},
},
},,
);
GetSystemDateAndTime
A device shall provide the UTCDateTime information.
Returns a ONVIF::Device::Elements::GetSystemDateAndTimeResponse object.
$response =
$interface−>GetSystemDateAndTime( {
},,
);
SetSystemFactoryDefault
This operation reloads the parameters on the device to their factory default values.
Returns a ONVIF::Device::Elements::SetSystemFactoryDefaultResponse object.
$response =
$interface−>SetSystemFactoryDefault( {
FactoryDefault => $some_value, # FactoryDefaultType
},,
);
UpgradeSystemFirmware
This operation upgrades a device firmware version. After a successful upgrade the response message is sent before the device reboots. The device should support firmware upgrade through the UpgradeSystemFirmware command. The exact format of the firmware data is outside the scope of this standard.
Returns a ONVIF::Device::Elements::UpgradeSystemFirmwareResponse object.
$response =
$interface−>UpgradeSystemFirmware( {
Firmware => { # ONVIF::Device::Types::AttachmentData
Include => { # ONVIF::Device::Types::Include
},
},
},,
);
SystemReboot
This operation reboots the device.
Returns a ONVIF::Device::Elements::SystemRebootResponse object.
$response =
$interface−>SystemReboot( {
},,
);
RestoreSystem
This operation restores the system backup configuration files(s) previously retrieved from a device. The device should support restore of backup configuration file(s) through the RestoreSystem command. The exact format of the backup configuration file(s) is outside the scope of this standard. If the command is supported, it shall accept backup files returned by the GetSystemBackup command.
Returns a ONVIF::Device::Elements::RestoreSystemResponse object.
$response =
$interface−>RestoreSystem( {
BackupFiles => { # ONVIF::Device::Types::BackupFile
Name => $some_value, # string
Data => { # ONVIF::Device::Types::AttachmentData
Include => { # ONVIF::Device::Types::Include
},
},
},
},,
);
GetSystemBackup
This operation is retrieves system backup configuration file(s) from a device. The device should support return of back up configuration file(s) through the GetSystemBackup command. The backup is returned with reference to a name and mime-type together with binary data. The exact format of the backup configuration files is outside the scope of this standard.
Returns a ONVIF::Device::Elements::GetSystemBackupResponse object.
$response =
$interface−>GetSystemBackup( {
},,
);
GetSystemLog
This operation gets a system log from the device. The exact format of the system logs is outside the scope of this standard.
Returns a ONVIF::Device::Elements::GetSystemLogResponse object.
$response =
$interface−>GetSystemLog( {
LogType => $some_value, # SystemLogType
},,
);
GetSystemSupportInformation
This operation gets arbitrary device diagnostics information from the device.
Returns a ONVIF::Device::Elements::GetSystemSupportInformationResponse object.
$response =
$interface−>GetSystemSupportInformation( {
},,
);
GetScopes
Configurable Fixed scope parameters are permanent device characteristics and cannot be removed through the device management interface. The scope type is indicated in the scope list returned in the get scope parameters response. A device shall support retrieval of discovery scope parameters through the GetScopes command. As some scope parameters are mandatory, the device shall return a non-empty scope list in the response.
Returns a ONVIF::Device::Elements::GetScopesResponse object.
$response =
$interface−>GetScopes( {
},,
);
SetScopes
This operation sets the scope parameters of a device. The scope parameters are used in the device discovery to match a probe message. This operation replaces all existing configurable scope parameters (not fixed parameters). If this shall be avoided, one should use the scope add command instead. The device shall support configuration of discovery scope parameters through the SetScopes command.
Returns a ONVIF::Device::Elements::SetScopesResponse object.
$response =
$interface−>SetScopes( {
Scopes => $some_value, # anyURI
},,
);
AddScopes
This operation adds new configurable scope parameters to a device. The scope parameters are used in the device discovery to match a probe message. The device shall support addition of discovery scope parameters through the AddScopes command.
Returns a ONVIF::Device::Elements::AddScopesResponse object.
$response =
$interface−>AddScopes( {
ScopeItem => $some_value, # anyURI
},,
);
RemoveScopes
This operation deletes scope-configurable scope parameters from a device. The scope parameters are used in the device discovery to match a probe message, see Section 7. The device shall support deletion of discovery scope parameters through the RemoveScopes command. Table
Returns a ONVIF::Device::Elements::RemoveScopesResponse object.
$response =
$interface−>RemoveScopes( {
ScopeItem => $some_value, # anyURI
},,
);
GetDiscoveryMode
This operation gets the discovery mode of a device. See Section 7.2 for the definition of the different device discovery modes. The device shall support retrieval of the discovery mode setting through the GetDiscoveryMode command.
Returns a ONVIF::Device::Elements::GetDiscoveryModeResponse object.
$response =
$interface−>GetDiscoveryMode( {
},,
);
SetDiscoveryMode
This operation sets the discovery mode operation of a device. See Section 7.2 for the definition of the different device discovery modes. The device shall support configuration of the discovery mode setting through the SetDiscoveryMode command.
Returns a ONVIF::Device::Elements::SetDiscoveryModeResponse object.
$response =
$interface−>SetDiscoveryMode( {
DiscoveryMode => $some_value, # DiscoveryMode
},,
);
GetRemoteDiscoveryMode
This operation gets the remote discovery mode of a device. See Section 7.4 for the definition of remote discovery extensions. A device that supports remote discovery shall support retrieval of the remote discovery mode setting through the GetRemoteDiscoveryMode command.
Returns a ONVIF::Device::Elements::GetRemoteDiscoveryModeResponse object.
$response =
$interface−>GetRemoteDiscoveryMode( {
},,
);
SetRemoteDiscoveryMode
This operation sets the remote discovery mode of operation of a device. See Section 7.4 for the definition of remote discovery remote extensions. A device that supports remote discovery shall support configuration of the discovery mode setting through the SetRemoteDiscoveryMode command.
Returns a ONVIF::Device::Elements::SetRemoteDiscoveryModeResponse object.
$response =
$interface−>SetRemoteDiscoveryMode( {
RemoteDiscoveryMode => $some_value, # DiscoveryMode
},,
);
GetDPAddresses
This operation gets the remote DP address or addresses from a device. If the device supports remote discovery, as specified in Section 7.4, the device shall support retrieval of the remote DP address(es) through the GetDPAddresses command.
Returns a ONVIF::Device::Elements::GetDPAddressesResponse object.
$response =
$interface−>GetDPAddresses( {
},,
);
GetEndpointReference
A client can ask for the device service endpoint reference address property that can be used to derive the password equivalent for remote user operation. The device shall support the GetEndpointReference command returning the address property of the device service endpoint reference.
Returns a ONVIF::Device::Elements::GetEndpointReferenceResponse object.
$response =
$interface−>GetEndpointReference( {
},,
);
GetRemoteUser
The algorithm to use for deriving the password is described in section 5.12.2.1 of the core specification.
Returns a ONVIF::Device::Elements::GetRemoteUserResponse object.
$response =
$interface−>GetRemoteUser( {
},,
);
SetRemoteUser
To remove the remote user SetRemoteUser should be called without the RemoteUser parameter.
Returns a ONVIF::Device::Elements::SetRemoteUserResponse object.
$response =
$interface−>SetRemoteUser( {
RemoteUser => { # ONVIF::Device::Types::RemoteUser
Username => $some_value, # string
Password => $some_value, # string
UseDerivedPassword => $some_value, # boolean
},
},,
);
GetUsers
This operation lists the registered users and corresponding credentials on a device. The device shall support retrieval of registered device users and their credentials for the user token through the GetUsers command.
Returns a ONVIF::Device::Elements::GetUsersResponse object.
$response =
$interface−>GetUsers( {
},,
);
CreateUsers
ONVIF compliant devices are recommended to support password length of at least 28 bytes, as clients may follow the password derivation mechanism which results in 'password equivalent' of length 28 bytes, as described in section 3.1.2 of the ONVIF security white paper.
Returns a ONVIF::Device::Elements::CreateUsersResponse object.
$response =
$interface−>CreateUsers( {
User => { # ONVIF::Device::Types::User
Username => $some_value, # string
Password => $some_value, # string
UserLevel => $some_value, # UserLevel
Extension => { # ONVIF::Device::Types::UserExtension
},
},
},,
);
DeleteUsers
This operation deletes users on a device. The device shall support deletion of device users and their credentials through the DeleteUsers command. A device may have one or more fixed users that cannot be deleted to ensure access to the unit. Either all users are deleted successfully or a fault message shall be returned and no users be deleted.
Returns a ONVIF::Device::Elements::DeleteUsersResponse object.
$response =
$interface−>DeleteUsers( {
Username => $some_value, # string
},,
);
SetUser
This operation updates the settings for one or several users on a device for authentication purposes. The device shall support update of device users and their credentials through the SetUser command. Either all change requests are processed successfully or a fault message shall be returned and no change requests be processed.
Returns a ONVIF::Device::Elements::SetUserResponse object.
$response =
$interface−>SetUser( {
User => { # ONVIF::Device::Types::User
Username => $some_value, # string
Password => $some_value, # string
UserLevel => $some_value, # UserLevel
Extension => { # ONVIF::Device::Types::UserExtension
},
},
},,
);
GetWsdlUrl
It is possible for an endpoint to request a URL that can be used to retrieve the complete schema and WSDL definitions of a device. The command gives in return a URL entry point where all the necessary product specific WSDL and schema definitions can be retrieved. The device shall provide a URL for WSDL and schema download through the GetWsdlUrl command.
Returns a ONVIF::Device::Elements::GetWsdlUrlResponse object.
$response =
$interface−>GetWsdlUrl( {
},,
);
GetCapabilities
Any endpoint can ask for the capabilities of a device using the capability exchange request response operation. The device shall indicate all its ONVIF compliant capabilities through the GetCapabilities command. The capability list includes references to the addresses (XAddr) of the service implementing the interface operations in the category. Apart from the addresses, the capabilities only reflect optional functions.
Returns a ONVIF::Device::Elements::GetCapabilitiesResponse object.
$response =
$interface−>GetCapabilities( {
Category => $some_value, # CapabilityCategory
},,
);
SetDPAddresses
This operation sets the remote DP address or addresses on a device. If the device supports remote discovery, as specified in Section 7.4, the device shall support configuration of the remote DP address(es) through the SetDPAddresses command.
Returns a ONVIF::Device::Elements::SetDPAddressesResponse object.
$response =
$interface−>SetDPAddresses( {
DPAddress => { # ONVIF::Device::Types::NetworkHost
Type => $some_value, # NetworkHostType
IPv4Address => $some_value, # IPv4Address
IPv6Address => $some_value, # IPv6Address
DNSname => $some_value, # DNSName
Extension => { #
ONVIF::Device::Types::NetworkHostExtension
},
},
},,
);
GetHostname
This operation is used by an endpoint to get the hostname from a device. The device shall return its hostname configurations through the GetHostname command.
Returns a ONVIF::Device::Elements::GetHostnameResponse object.
$response =
$interface−>GetHostname( {
},,
);
SetHostname
A device shall accept string formatted according to RFC 1123 section 2.1 or alternatively to RFC 952, other string shall be considered as invalid strings.
Returns a ONVIF::Device::Elements::SetHostnameResponse object.
$response =
$interface−>SetHostname( {
Name => $some_value, # token
},,
);
SetHostnameFromDHCP
This operation controls whether the hostname is set manually or retrieved via DHCP.
Returns a ONVIF::Device::Elements::SetHostnameFromDHCPResponse object.
$response =
$interface−>SetHostnameFromDHCP( {
FromDHCP => $some_value, # boolean
},,
);
GetDNS
This operation gets the DNS settings from a device. The device shall return its DNS configurations through the GetDNS command.
Returns a ONVIF::Device::Elements::GetDNSResponse object.
$response =
$interface−>GetDNS( {
},,
);
SetDNS
This operation sets the DNS settings on a device. It shall be possible to set the device DNS configurations through the SetDNS command.
Returns a ONVIF::Device::Elements::SetDNSResponse object.
$response =
$interface−>SetDNS( {
FromDHCP => $some_value, # boolean
SearchDomain => $some_value, # token
DNSManual => { # ONVIF::Device::Types::IPAddress
Type => $some_value, # IPType
IPv4Address => $some_value, # IPv4Address
IPv6Address => $some_value, # IPv6Address
},
},,
);
GetNTP
This operation gets the NTP settings from a device. If the device supports NTP, it shall be possible to get the NTP server settings through the GetNTP command.
Returns a ONVIF::Device::Elements::GetNTPResponse object.
$response =
$interface−>GetNTP( {
},,
);
SetNTP
Changes to the NTP server list will not affect the clock mode DateTimeType. Use SetSystemDateAndTime to activate NTP operation.
Returns a ONVIF::Device::Elements::SetNTPResponse object.
$response =
$interface−>SetNTP( {
FromDHCP => $some_value, # boolean
NTPManual => { # ONVIF::Device::Types::NetworkHost
Type => $some_value, # NetworkHostType
IPv4Address => $some_value, # IPv4Address
IPv6Address => $some_value, # IPv6Address
DNSname => $some_value, # DNSName
Extension => { #
ONVIF::Device::Types::NetworkHostExtension
},
},
},,
);
GetDynamicDNS
This operation gets the dynamic DNS settings from a device. If the device supports dynamic DNS as specified in [RFC 2136] and [RFC 4702], it shall be possible to get the type, name and TTL through the GetDynamicDNS command.
Returns a ONVIF::Device::Elements::GetDynamicDNSResponse object.
$response =
$interface−>GetDynamicDNS( {
},,
);
SetDynamicDNS
This operation sets the dynamic DNS settings on a device. If the device supports dynamic DNS as specified in [RFC 2136] and [RFC 4702], it shall be possible to set the type, name and TTL through the SetDynamicDNS command.
Returns a ONVIF::Device::Elements::SetDynamicDNSResponse object.
$response =
$interface−>SetDynamicDNS( {
Type => $some_value, # DynamicDNSType
Name => $some_value, # DNSName
TTL => $some_value, # duration
},,
);
GetNetworkInterfaces
This operation gets the network interface configuration from a device. The device shall support return of network interface configuration settings as defined by the NetworkInterface type through the GetNetworkInterfaces command.
Returns a ONVIF::Device::Elements::GetNetworkInterfacesResponse object.
$response =
$interface−>GetNetworkInterfaces( {
},,
);
SetNetworkInterfaces
For interoperability with a client unaware of the IEEE 802.11 extension a device shall retain its IEEE 802.11 configuration if the IEEE 802.11 configuration element isn't present in the request.
Returns a ONVIF::Device::Elements::SetNetworkInterfacesResponse object.
$response =
$interface−>SetNetworkInterfaces( {
InterfaceToken => $some_value, # ReferenceToken
NetworkInterface => { #
ONVIF::Device::Types::NetworkInterfaceSetConfiguration
Enabled => $some_value, # boolean
Link => { #
ONVIF::Device::Types::NetworkInterfaceConnectionSetting
AutoNegotiation => $some_value, # boolean
Speed => $some_value, # int
Duplex => $some_value, # Duplex
},
MTU => $some_value, # int
IPv4 => { #
ONVIF::Device::Types::IPv4NetworkInterfaceSetConfiguration
Enabled => $some_value, # boolean
Manual => { # ONVIF::Device::Types::PrefixedIPv4Address
Address => $some_value, # IPv4Address
PrefixLength => $some_value, # int
},
DHCP => $some_value, # boolean
},
IPv6 => { #
ONVIF::Device::Types::IPv6NetworkInterfaceSetConfiguration
Enabled => $some_value, # boolean
AcceptRouterAdvert => $some_value, # boolean
Manual => { # ONVIF::Device::Types::PrefixedIPv6Address
Address => $some_value, # IPv6Address
PrefixLength => $some_value, # int
},
DHCP => $some_value, # IPv6DHCPConfiguration
},
Extension => { #
ONVIF::Device::Types::NetworkInterfaceSetConfigurationExtension
Dot3 => { # ONVIF::Device::Types::Dot3Configuration
},
Dot11 => { # ONVIF::Device::Types::Dot11Configuration
SSID => $some_value, # Dot11SSIDType
Mode => $some_value, # Dot11StationMode
Alias => $some_value, # Name
Priority => $some_value, # NetworkInterfaceConfigPriority
Security => { #
ONVIF::Device::Types::Dot11SecurityConfiguration
Mode => $some_value, # Dot11SecurityMode
Algorithm => $some_value, # Dot11Cipher
PSK => { # ONVIF::Device::Types::Dot11PSKSet
Key => $some_value, # Dot11PSK
Passphrase => $some_value, # Dot11PSKPassphrase
Extension => { #
ONVIF::Device::Types::Dot11PSKSetExtension
},
},
Dot1X => $some_value, # ReferenceToken
Extension => { #
ONVIF::Device::Types::Dot11SecurityConfigurationExtension
},
},
},
Extension => { #
ONVIF::Device::Types::NetworkInterfaceSetConfigurationExtension2
},
},
},
},,
);
GetNetworkProtocols
This operation gets defined network protocols from a device. The device shall support the GetNetworkProtocols command returning configured network protocols.
Returns a ONVIF::Device::Elements::GetNetworkProtocolsResponse object.
$response =
$interface−>GetNetworkProtocols( {
},,
);
SetNetworkProtocols
This operation configures defined network protocols on a device. The device shall support configuration of defined network protocols through the SetNetworkProtocols command.
Returns a ONVIF::Device::Elements::SetNetworkProtocolsResponse object.
$response =
$interface−>SetNetworkProtocols( {
NetworkProtocols => { #
ONVIF::Device::Types::NetworkProtocol
Name => $some_value, # NetworkProtocolType
Enabled => $some_value, # boolean
Port => $some_value, # int
Extension => { #
ONVIF::Device::Types::NetworkProtocolExtension
},
},
},,
);
GetNetworkDefaultGateway
This operation gets the default gateway settings from a device. The device shall support the GetNetworkDefaultGateway command returning configured default gateway address(es).
Returns a ONVIF::Device::Elements::GetNetworkDefaultGatewayResponse object.
$response =
$interface−>GetNetworkDefaultGateway( {
},,
);
SetNetworkDefaultGateway
This operation sets the default gateway settings on a device. The device shall support configuration of default gateway through the SetNetworkDefaultGateway command.
Returns a ONVIF::Device::Elements::SetNetworkDefaultGatewayResponse object.
$response =
$interface−>SetNetworkDefaultGateway( {
IPv4Address => $some_value, # IPv4Address
IPv6Address => $some_value, # IPv6Address
},,
);
GetZeroConfiguration
Devices supporting zero configuration on more than one interface shall use the extension to list the additional interface settings.
Returns a ONVIF::Device::Elements::GetZeroConfigurationResponse object.
$response =
$interface−>GetZeroConfiguration( {
},,
);
SetZeroConfiguration
This operation sets the zero-configuration. Use GetCapalities to get if zero-zero-configuration is supported or not.
Returns a ONVIF::Device::Elements::SetZeroConfigurationResponse object.
$response =
$interface−>SetZeroConfiguration( {
InterfaceToken => $some_value, # ReferenceToken
Enabled => $some_value, # boolean
},,
);
GetIPAddressFilter
This operation gets the IP address filter settings from a device. If the device supports device access control based on IP filtering rules (denied or accepted ranges of IP addresses), the device shall support the GetIPAddressFilter command.
Returns a ONVIF::Device::Elements::GetIPAddressFilterResponse object.
$response =
$interface−>GetIPAddressFilter( {
},,
);
SetIPAddressFilter
This operation sets the IP address filter settings on a device. If the device supports device access control based on IP filtering rules (denied or accepted ranges of IP addresses), the device shall support configuration of IP filtering rules through the SetIPAddressFilter command.
Returns a ONVIF::Device::Elements::SetIPAddressFilterResponse object.
$response =
$interface−>SetIPAddressFilter( {
IPAddressFilter => { #
ONVIF::Device::Types::IPAddressFilter
Type => $some_value, # IPAddressFilterType
IPv4Address => { #
ONVIF::Device::Types::PrefixedIPv4Address
Address => $some_value, # IPv4Address
PrefixLength => $some_value, # int
},
IPv6Address => { #
ONVIF::Device::Types::PrefixedIPv6Address
Address => $some_value, # IPv6Address
PrefixLength => $some_value, # int
},
Extension => { #
ONVIF::Device::Types::IPAddressFilterExtension
},
},
},,
);
AddIPAddressFilter
This operation adds an IP filter address to a device. If the device supports device access control based on IP filtering rules (denied or accepted ranges of IP addresses), the device shall support adding of IP filtering addresses through the AddIPAddressFilter command.
Returns a ONVIF::Device::Elements::AddIPAddressFilterResponse object.
$response =
$interface−>AddIPAddressFilter( {
IPAddressFilter => { #
ONVIF::Device::Types::IPAddressFilter
Type => $some_value, # IPAddressFilterType
IPv4Address => { #
ONVIF::Device::Types::PrefixedIPv4Address
Address => $some_value, # IPv4Address
PrefixLength => $some_value, # int
},
IPv6Address => { #
ONVIF::Device::Types::PrefixedIPv6Address
Address => $some_value, # IPv6Address
PrefixLength => $some_value, # int
},
Extension => { #
ONVIF::Device::Types::IPAddressFilterExtension
},
},
},,
);
RemoveIPAddressFilter
This operation deletes an IP filter address from a device. If the device supports device access control based on IP filtering rules (denied or accepted ranges of IP addresses), the device shall support deletion of IP filtering addresses through the RemoveIPAddressFilter command.
Returns a ONVIF::Device::Elements::RemoveIPAddressFilterResponse object.
$response =
$interface−>RemoveIPAddressFilter( {
IPAddressFilter => { #
ONVIF::Device::Types::IPAddressFilter
Type => $some_value, # IPAddressFilterType
IPv4Address => { #
ONVIF::Device::Types::PrefixedIPv4Address
Address => $some_value, # IPv4Address
PrefixLength => $some_value, # int
},
IPv6Address => { #
ONVIF::Device::Types::PrefixedIPv6Address
Address => $some_value, # IPv6Address
PrefixLength => $some_value, # int
},
Extension => { #
ONVIF::Device::Types::IPAddressFilterExtension
},
},
},,
);
GetAccessPolicy
Access to different services and sub-sets of services should be subject to access control. The WS-Security framework gives the prerequisite for end-point authentication. Authorization decisions can then be taken using an access security policy. This standard does not mandate any particular policy description format or security policy but this is up to the device manufacturer or system provider to choose policy and policy description format of choice. However, an access policy (in arbitrary format) can be requested using this command. If the device supports access policy settings based on WS-Security authentication, then the device shall support this command.
Returns a ONVIF::Device::Elements::GetAccessPolicyResponse object.
$response =
$interface−>GetAccessPolicy( {
},,
);
SetAccessPolicy
This command sets the device access security policy (for more details on the access security policy see the Get command). If the device supports access policy settings based on WS-Security authentication, then the device shall support this command.
Returns a ONVIF::Device::Elements::SetAccessPolicyResponse object.
$response =
$interface−>SetAccessPolicy( {
PolicyFile => { # ONVIF::Device::Types::BinaryData
Data => $some_value, # base64Binary
},
},,
);
CreateCertificate
If a device supports onboard key pair generation, the device that supports TLS shall support this certificate creation command. And also, if a device supports onboard key pair generation, the device that support IEEE 802.1X shall support this command for the purpose of key pair generation. Certificates and key pairs are identified using certificate IDs. These IDs are either chosen by the certificate generation requester or by the device (in case that no ID value is given).
Returns a ONVIF::Device::Elements::CreateCertificateResponse object.
$response =
$interface−>CreateCertificate( {
CertificateID => $some_value, # token
Subject => $some_value, # string
ValidNotBefore => $some_value, # dateTime
ValidNotAfter => $some_value, # dateTime
},,
);
GetCertificates
This operation gets all device server certificates (including self-signed) for the purpose of TLS authentication and all device client certificates for the purpose of IEEE 802.1X authentication. This command lists only the TLS server certificates and IEEE 802.1X client certificates for the device (neither trusted CA certificates nor trusted root certificates). The certificates are returned as binary data. A device that supports TLS shall support this command and the certificates shall be encoded using ASN.1 [X.681], [X.682], [X.683] DER [X.690] encoding rules.
Returns a ONVIF::Device::Elements::GetCertificatesResponse object.
$response =
$interface−>GetCertificates( {
},,
);
GetCertificatesStatus
This operation is specific to TLS functionality. This operation gets the status (enabled/disabled) of the device TLS server certificates. A device that supports TLS shall support this command.
Returns a ONVIF::Device::Elements::GetCertificatesStatusResponse object.
$response =
$interface−>GetCertificatesStatus( {
},,
);
SetCertificatesStatus
This operation is specific to TLS functionality. This operation sets the status (enable/disable) of the device TLS server certificates. A device that supports TLS shall support this command. Typically only one device server certificate is allowed to be enabled at a time.
Returns a ONVIF::Device::Elements::SetCertificatesStatusResponse object.
$response =
$interface−>SetCertificatesStatus( {
CertificateStatus => { #
ONVIF::Device::Types::CertificateStatus
CertificateID => $some_value, # token
Status => $some_value, # boolean
},
},,
);
DeleteCertificates
This operation deletes a certificate or multiple certificates. The device MAY also delete a private/public key pair which is coupled with the certificate to be deleted. The device that support either TLS or IEEE 802.1X shall support the deletion of a certificate or multiple certificates through this command. Either all certificates are deleted successfully or a fault message shall be returned without deleting any certificate.
Returns a ONVIF::Device::Elements::DeleteCertificatesResponse object.
$response =
$interface−>DeleteCertificates( {
CertificateID => $some_value, # token
},,
);
GetPkcs10Request
A device that support onboard key pair generation that supports either TLS or IEEE 802.1X using client certificate shall support this command.
Returns a ONVIF::Device::Elements::GetPkcs10RequestResponse object.
$response =
$interface−>GetPkcs10Request( {
CertificateID => $some_value, # token
Subject => $some_value, # string
Attributes => { # ONVIF::Device::Types::BinaryData
Data => $some_value, # base64Binary
},
},,
);
LoadCertificates
This command is applicable to any device type, although the parameter name is called for historical reasons NVTCertificate.
Returns a ONVIF::Device::Elements::LoadCertificatesResponse object.
$response =
$interface−>LoadCertificates( {
NVTCertificate => { # ONVIF::Device::Types::Certificate
CertificateID => $some_value, # token
Certificate => { # ONVIF::Device::Types::BinaryData
Data => $some_value, # base64Binary
},
},
},,
);
GetClientCertificateMode
This operation is specific to TLS functionality. This operation gets the status (enabled/disabled) of the device TLS client authentication. A device that supports TLS shall support this command.
Returns a ONVIF::Device::Elements::GetClientCertificateModeResponse object.
$response =
$interface−>GetClientCertificateMode( {
},,
);
SetClientCertificateMode
This operation is specific to TLS functionality. This operation sets the status (enabled/disabled) of the device TLS client authentication. A device that supports TLS shall support this command.
Returns a ONVIF::Device::Elements::SetClientCertificateModeResponse object.
$response =
$interface−>SetClientCertificateMode( {
Enabled => $some_value, # boolean
},,
);
GetRelayOutputs
This method has been deprecated with version 2.0. Refer to the DeviceIO service.
Returns a ONVIF::Device::Elements::GetRelayOutputsResponse object.
$response =
$interface−>GetRelayOutputs( {
},,
);
SetRelayOutputSettings
This method has been deprecated with version 2.0. Refer to the DeviceIO service.
Returns a ONVIF::Device::Elements::SetRelayOutputSettingsResponse object.
$response =
$interface−>SetRelayOutputSettings( {
RelayOutputToken => $some_value, # ReferenceToken
Properties => { #
ONVIF::Device::Types::RelayOutputSettings
Mode => $some_value, # RelayMode
DelayTime => $some_value, # duration
IdleState => $some_value, # RelayIdleState
},
},,
);
SetRelayOutputState
This method has been deprecated with version 2.0. Refer to the DeviceIO service.
Returns a ONVIF::Device::Elements::SetRelayOutputStateResponse object.
$response =
$interface−>SetRelayOutputState( {
RelayOutputToken => $some_value, # ReferenceToken
LogicalState => $some_value, # RelayLogicalState
},,
);
SendAuxiliaryCommand
tt:IRLamp|Auto − Request to configure an IR illuminator attached to the unit so that it automatically turns ON and OFF. A device that indicates auxiliary service capability shall support this command.
Returns a ONVIF::Device::Elements::SendAuxiliaryCommandResponse object.
$response =
$interface−>SendAuxiliaryCommand( {
AuxiliaryCommand => $some_value, # AuxiliaryData
},,
);
GetCACertificates
CA certificates will be loaded into a device and be used for the sake of following two cases. The one is for the purpose of TLS client authentication in TLS server function. The other one is for the purpose of Authentication Server authentication in IEEE 802.1X function. This operation gets all CA certificates loaded into a device. A device that supports either TLS client authentication or IEEE 802.1X shall support this command and the returned certificates shall be encoded using ASN.1 [X.681], [X.682], [X.683] DER [X.690] encoding rules.
Returns a ONVIF::Device::Elements::GetCACertificatesResponse object.
$response =
$interface−>GetCACertificates( {
},,
);
LoadCertificateWithPrivateKey
A device that does not support onboard key pair generation and support either TLS or IEEE 802.1X using client certificate shall support this command. A device that support onboard key pair generation MAY support this command. The security policy of a device that supports this operation should make sure that the private key is sufficiently protected.
Returns a ONVIF::Device::Elements::LoadCertificateWithPrivateKeyResponse object.
$response =
$interface−>LoadCertificateWithPrivateKey( {
CertificateWithPrivateKey => { #
ONVIF::Device::Types::CertificateWithPrivateKey
CertificateID => $some_value, # token
Certificate => { # ONVIF::Device::Types::BinaryData
Data => $some_value, # base64Binary
},
PrivateKey => { # ONVIF::Device::Types::BinaryData
Data => $some_value, # base64Binary
},
},
},,
);
GetCertificateInformation
A device that supports either TLS or IEEE 802.1X should support this command.
Returns a ONVIF::Device::Elements::GetCertificateInformationResponse object.
$response =
$interface−>GetCertificateInformation( {
CertificateID => $some_value, # token
},,
);
LoadCACertificates
A device that support either TLS or IEEE 802.1X shall support this command. As for the supported certificate format, either DER format or PEM format is possible to be used. But a device that support this command shall support at least DER format as supported format type. The device may sort the received certificate(s) based on the public key and subject information in the certificate(s). Either all CA certificates are loaded successfully or a fault message shall be returned without loading any CA certificate.
Returns a ONVIF::Device::Elements::LoadCACertificatesResponse object.
$response =
$interface−>LoadCACertificates( {
CACertificate => { # ONVIF::Device::Types::Certificate
CertificateID => $some_value, # token
Certificate => { # ONVIF::Device::Types::BinaryData
Data => $some_value, # base64Binary
},
},
},,
);
CreateDot1XConfiguration
This operation newly creates IEEE 802.1X configuration parameter set of the device. The device shall support this command if it supports IEEE 802.1X. If the device receives this request with already existing configuration token (Dot1XConfigurationToken) specification, the device should respond with ’ter:ReferenceToken ’ error to indicate there is some configuration conflict.
Returns a ONVIF::Device::Elements::CreateDot1XConfigurationResponse object.
$response =
$interface−>CreateDot1XConfiguration( {
Dot1XConfiguration => { #
ONVIF::Device::Types::Dot1XConfiguration
Dot1XConfigurationToken => $some_value, # ReferenceToken
Identity => $some_value, # string
AnonymousID => $some_value, # string
EAPMethod => $some_value, # int
CACertificateID => $some_value, # token
EAPMethodConfiguration => { #
ONVIF::Device::Types::EAPMethodConfiguration
TLSConfiguration => { #
ONVIF::Device::Types::TLSConfiguration
CertificateID => $some_value, # token
},
Password => $some_value, # string
Extension => { # ONVIF::Device::Types::EapMethodExtension
},
},
Extension => { #
ONVIF::Device::Types::Dot1XConfigurationExtension
},
},
},,
);
SetDot1XConfiguration
While the CreateDot1XConfiguration command is trying to create a new configuration parameter set, this operation modifies existing IEEE 802.1X configuration parameter set of the device. A device that support IEEE 802.1X shall support this command.
Returns a ONVIF::Device::Elements::SetDot1XConfigurationResponse object.
$response =
$interface−>SetDot1XConfiguration( {
Dot1XConfiguration => { #
ONVIF::Device::Types::Dot1XConfiguration
Dot1XConfigurationToken => $some_value, # ReferenceToken
Identity => $some_value, # string
AnonymousID => $some_value, # string
EAPMethod => $some_value, # int
CACertificateID => $some_value, # token
EAPMethodConfiguration => { #
ONVIF::Device::Types::EAPMethodConfiguration
TLSConfiguration => { #
ONVIF::Device::Types::TLSConfiguration
CertificateID => $some_value, # token
},
Password => $some_value, # string
Extension => { # ONVIF::Device::Types::EapMethodExtension
},
},
Extension => { #
ONVIF::Device::Types::Dot1XConfigurationExtension
},
},
},,
);
GetDot1XConfiguration
A device that supports IEEE 802.1X shall support this command. Regardless of whether the 802.1X method in the retrieved configuration has a password or not, the device shall not include the Password element in the response.
Returns a ONVIF::Device::Elements::GetDot1XConfigurationResponse object.
$response =
$interface−>GetDot1XConfiguration( {
Dot1XConfigurationToken => $some_value, # ReferenceToken
},,
);
GetDot1XConfigurations
Regardless of whether the 802.1X method in the retrieved configuration has a password or not, the device shall not include the Password element in the response.
Returns a ONVIF::Device::Elements::GetDot1XConfigurationsResponse object.
$response =
$interface−>GetDot1XConfigurations( {
},,
);
DeleteDot1XConfiguration
This operation deletes an IEEE 802.1X configuration parameter set from the device. Which configuration should be deleted is specified by the ’Dot1XConfigurationToken’ in the request. A device that support IEEE 802.1X shall support this command.
Returns a ONVIF::Device::Elements::DeleteDot1XConfigurationResponse object.
$response =
$interface−>DeleteDot1XConfiguration( {
Dot1XConfigurationToken => $some_value, # ReferenceToken
},,
);
GetDot11Capabilities
This operation returns the IEEE802.11 capabilities. The device shall support this operation.
Returns a ONVIF::Device::Elements::GetDot11CapabilitiesResponse object.
$response =
$interface−>GetDot11Capabilities( {
},,
);
GetDot11Status
This operation returns the status of a wireless network interface. The device shall support this command.
Returns a ONVIF::Device::Elements::GetDot11StatusResponse object.
$response =
$interface−>GetDot11Status( {
InterfaceToken => $some_value, # ReferenceToken
},,
);
ScanAvailableDot11Networks
This operation returns a lists of the wireless networks in range of the device. A device should support this operation.
Returns a ONVIF::Device::Elements::ScanAvailableDot11NetworksResponse object.
$response =
$interface−>ScanAvailableDot11Networks( {
InterfaceToken => $some_value, # ReferenceToken
},,
);
GetSystemUris
If the device allows retrieval of system logs, support information or system backup data, it should make them available via HTTP GET. If it does, it shall support the GetSystemUris command.
Returns a ONVIF::Device::Elements::GetSystemUrisResponse object.
$response =
$interface−>GetSystemUris( {
},,
);
StartFirmwareUpgrade
The value of the Content−Type header in the HTTP POST request shall be "application/octetstream".
Returns a ONVIF::Device::Elements::StartFirmwareUpgradeResponse object.
$response =
$interface−>StartFirmwareUpgrade( {
},,
);
StartSystemRestore
The value of the Content−Type header in the HTTP POST request shall be "application/octetstream".
Returns a ONVIF::Device::Elements::StartSystemRestoreResponse object.
$response =
$interface−>StartSystemRestore( {
},,
);
Generated by SOAP::WSDL on Mon Jun 30 13:36:10 2014